Description
This premium pre-built Estate style wood fence panel offers elegant design with superior durability. Each panel is professionally constructed using pressure-treated pine for maximum longevity and resistance to insects and rot.
The Estate style features a decorative top cap and trim elements that create a sophisticated, high-end appearance. These pre-built panels are the perfect solution for homeowners looking for quick installation without sacrificing quality or aesthetics.
**Features:**
– Complete 6’x8′ pre-assembled fence panel
– Estate style design with decorative top cap and trim
– Constructed with premium pressure-treated pine
– Ready for immediate installation
– Superior craftsmanship and attention to detail
– Can be stained or painted to your preference
**Specifications:**
– Panel dimensions: 6 feet high x 8 feet wide
– Weight: Approximately 120 lbs per panel
– Pickets: 5/8″ x 5.5″ pressure treated pine, flat top style
– Rails: Three 2×4 pressure treated horizontal supports
– Top cap: 1×6 pressure treated decorative trim
– Treatment: MCA (Micronized Copper Azole) rated for above-ground use
– All fasteners included and pre-installed (hot-dipped galvanized)
**Installation Requirements:**
– Requires two 4×4 posts set at 8′ center-to-center (sold separately)
– Recommended post length: 9 feet minimum (3 feet in ground, 6 feet above)
– Mounting hardware included: Four 3/8″ x 3.5″ lag bolts with washers
– Recommended concrete: 80 lb bag per post (sold separately)
– Basic tools needed: Level, post hole digger, wrench, measuring tape
**Frequently Asked Questions:**
*How heavy is each panel?*
Each panel weighs approximately 120 lbs and typically requires two people to lift and position during installation.
*How long does installation take?*
With posts already set, panel installation takes approximately 30-45 minutes per panel. Total installation including setting posts requires 2-3 hours per panel.
*Are the panels customizable?*
While the panels come pre-assembled, they can be trimmed in height or width if needed for custom applications. Trimming will not void the warranty if done properly.
*How do the panels attach to the posts?*
Panels attach using included lag bolts through pre-drilled holes in the end rails. No special brackets required.
*Can these panels be used for a hill or slope?*
Yes, on gentle slopes you can step the panels. For slopes greater than 15 degrees, we recommend our rackable fence panel options.
*What maintenance is required?*
Minimal maintenance – inspect annually for loose fasteners and apply stain or sealant every 2-3 years for maximum longevity.
*Do I need to stain or seal these panels?*
While not required immediately, applying a quality stain/sealer after 6 months will significantly extend the life and appearance of your fence.
*How long will these panels last?*
With proper installation and periodic maintenance, these panels typically last 15-20+ years.
**Warranty:**
Backed by a 1-year manufacturer’s warranty against defects in materials and workmanship. See warranty documentation for details.
**Installation Note:** These panels require 4×4 posts (sold separately) set at 8′ on center. For best results, we recommend using concrete to set posts. Allow concrete to cure for 24-48 hours before attaching panels.
*For a complete fence project, don’t forget to add posts, concrete, and our professional-grade fence installation kit to your order.*
